How to Make an Easy Origami Robot: Simple Step-by-Step Paper Folding Art
MediumAges 7+20 minCut and fold + 2 drawingA4 paper or cardScissors and glue
Quick answerTo make an easy paper robot, print the template, cut out the pieces, fold and glue them together, then draw the details. It takes 7 steps and about 20 minutes.
Step 1 of 7
Paper:
How to fold an easy origami robot, step by step
Each picture shows the fold to make in that step. Tap Replay to watch it move.
01
Step 1: Print the template
Print the page at 100% on colored paper. The dashed line around the robot is where you cut.
02
Step 2: Cut it out
With a grown-up helping, cut out the three boxes, the arch between the legs, and the two arms.
03
Step 3: Fold up the boxes
Fold up the walls of all three boxes. Fold the little rim flaps on the body and head inward.
04
Step 4: Glue and stack
Glue the corner tabs inside each box. Turn them closed side up. Glue the body on the legs, and the head on top.
05
Step 5: Glue on the arms
Fold the tab at the top of each arm. Glue one arm on each side of the body, sticking out with the hand down.
06
Step 6: Draw the face
Marker 1: draw two round yellow eyes and a mouth on the head.
07
Step 7: Add the control panel
Marker 2: draw a blue panel with red and green buttons on the body. Beep boop!
Free printable
Print it, practice it, fold it
Download the printable guide for the robot and practice on paper, with the fold lines already printed.
Step sheet with fold symbols and measurements
Template for the robot: print on colored paper, cut it out and fold
This paper robot is a cut-and-glue craft. Three little boxes stack up into legs, a body and a head, and two arms are glued on the sides.
What you need
1 sheet of colored paper or card (A4 or Letter)
Safe scissors (a grown-up helps)
A marker
A glue stick
Plain colored paper or card works best for a robot; thin card stands up better than printer paper.
Tricky bits and fixes
The boxes lean
Press each corner tab firmly inside its wall, and glue every rim flap before you stack the next box.
The arms fall off
Glue the whole arm tab flat on the body and hold it for a few seconds.
Make it your own
Fold it in different colors
Fold a big one and a small one
Glue it on a card
Questions grown-ups ask
What paper is best for an origami robot?
Plain colored paper or card works best for a robot; thin card stands up better than printer paper.
How old do kids need to be?
Children from about 7 can make it, with a grown-up helping with the scissors.
How long does it take?
About 20 minutes the first time, and a little less once you know the folds.
How this lesson was made
The folds were checked and approved by the EasyPaper Art team on 2026-10-21 before this lesson was made. The animation, step pictures and printable all come from the same fold model, so they always match. Updated 2026-10-21.